CT Scans Health Article

Definition

Computed tomography (CT) scans are completed with the use of a 360-degree x-ray beam and computer production of images. These scans allow for cross-sectional views of body organs and tissues. Computed tomography is also known as computerized axial tomography or CAT scan.

Purpose

CT scans are used to image a wide variety of body structures and internal organs. Since the 1990s, CT equipment has become more affordable and available. In some diagnoses, CT scans have become the first imaging exam of choice. Because the computerized image is so sharp, focused, and three-dimensional, many tissues can be better differentiated than on standard x rays. Common CT indications include:

• Sinus studies. The CT scan can show details of sinusitis and bone fractures. Physicians may order a CT scan of the sinuses to provide an accurate map for surgery.
• Brain studies. Brain scans can detect tumors, strokes, and hematomas (collections of blood that have escaped from the vessels). The introduction of CT scanning, especially spiral CT, has helped reduce the need for more invasive procedures such as cerebral angiography.
• Body scans. CT scans of the body will often be used to observe abdominal organs, such as the liver, kidneys, adrenal glands, spleen, pancreas, biliary tree and lymph nodes, and extremities.
• Aorta scans. CT scans can focus on the thoracic or abdominal sections of the aorta to locate aneurysms and other possible aortic diseases.
• Chest scans. CT scans of the chest are useful in distinguishing tumors and in detailing accumulation of fluid in chest infections.

Description

Computed tomography is a combination of focused x-ray beams, a detector array, and computerized production of an image. Introduced in the early 1970s, this radiologic procedure has advanced rapidly and is now widely used, sometimes in the place of standard x rays.

CT equipment

A CT scan may be performed in a hospital or outpatient imaging center. Although the equipment looks large and intimidating, it is very sophisticated and fairly comfortable. The patient is asked to lie on a narrow table that slides into the center of the scanner, called the gantry. The scanner looks like a square doughnut with a round opening in the middle, which allows the x-ray beam to rotate around the patient. The scanner's gantry section may also be tilted slightly to allow for certain cross-sectional angles.

CT procedure

The patient will feel the table move very slightly as the precise adjustments for each sectional image are made. A technologist watches the procedure from a window and views the images on a monitor.

It is essential that the patient lie very still during the procedure to prevent motion blurring. In some studies, such as chest CTs, the patient will be asked to hold his or her breath during image capture.

Following the procedure, films of the images are usually printed for the radiologist and referring physician to review. A radiologist can also interpret CT exams on a special viewing console. The procedure time will vary in length depending on the area being imaged. Average study times are from 30 to 60 minutes. Some patients may be concerned about claustrophobia, but the width of the gantry portion of the scanner is wide enough to preclude problems with claustrophobia, in most instances.

The CT image

Traditional x rays image organs in two dimensions, with the possibility that organs in the front of the body are superimposed over those in the back. CT scans allow for a more three-dimensional effect. Some have compared CT images to slices in a loaf of bread. Precise sections of the body can be located and imaged as cross-sectional views. The technologist's console displays a computerized image of each section captured by the xray beam and detector array. Thus, various densities of tissue can be easily distinguished.